Process Control Panel

There are three ways to open a Process Control Panel:

(You may need to make sure that the correct Process has been selected if Process Control Blocks overlap.)

1. If a Process Control Block is selected (blue), pressing the P key will open the Control Panel (shown right) for the selected Process (this is the fastest method)
   OR
2. Left click on the Control Panel button in either the Guide or Dub Process Control Block.
3. RIGHT CLICK on the Output Track of the Process concerned and use the contextual menu to select Processname > Settings.

The Process Control Panels differ somewhat depending on the Process. 
For details see the individual Process topics.

If the Pinned control is turned ON, the "pinned" panel will stay open. Multiple "Pinned" panels can remain open for comparison, but the Control Panel for the selected process will have a green-tinted name bar at the top.

To close the panel, either press the P key, or click the "X" button top left in the Control Panel, or click the button (once or twice - depending on what has been previously selected).

Next

Related topics:

New Process window

Changing input and output tracks

Process Control Track

Setting a Process Control Block

Process versions

Adjusting Match settings

Adjusting Doubler settings

Modifying Ajdust settings